ZK4501-0004-xxxx | Motor extension cable 2.5 mm² with M23 plug, for fixed installation (service phase)
ZK4501-0004-xxxx | Motor extension cable 2.5 mm² with M23 plug, for fixed installation (service phase)
Contact assembly
cables for fixed installation,
min. bending radius = 238 mm (18 x OD),
(4 x 2.5 mm² + 2 x (2 x 1 mm²)),
from 25 m motor choke required.
The cable is UL and CSA listed.
suitable for:
- ZK4500-0004-xxxx
- ZK4502-0004-xxxx
- ZK4500-0024-xxxx
- ZK4502-0024-xxxx
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | M23 |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 8-pin |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Installation size | M23 |
| Connector type | socket |
| Contact type | male |
| Number of positions (face) | 8-pin |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Cable by meter |
|---|---|
| Operating voltage | max. 1000 V AC (UL), Uo/U 600/1000 V (VDE) |
| Cross-section (power) | 2.50 mm² (approx. AWG14) |
| Cross-section (signal) | 1 mm² (approx. AWG18) |
| Use | fixed installation |
| Material jacket | PVC (polyvinyl chloride) |
| Outer cable diameter | 13.4 mm ± 0.4 mm (0.5276" ± 0.0157") |
| Min. bending radius, fixed installation | 5 x outer cable diameter |
| Jacket color | orange |
| A1 | 79.00 mm |
| A2 | 28.00 mm |
| B1 | 70.00 mm |
| B2 | 20.00 mm |
| Ordering information | Length |
|---|---|
| ZK4501-0004-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2025 - Terms of Use