KL6581 | Bus Terminal, 1-channel communication interface, EnOcean®, master
+24 V DC
KL6581 | Bus Terminal, 1-channel communication interface, EnOcean®, master
The bidirectional EnOcean® technology receives signals from battery-less sensors or transmits data to actuators. With a radio signal range of 30 m, the wiring of buildings can be simplified significantly. The KL6581 EnOcean® master terminal is the link between the KL6583 EnOcean® transmitter and receiver modules and the application. Up to eight KL6583 EnOcean® transmitters and receivers can be connected to a KL6581 EnOcean® master terminal. The KL6583 modules are connected to the KL6581 via two wires for the power supply and two wires for the data bus that transmits the EnOcean® telegrams. The maximum total length of the data bus is 500 m.
Product status:
regular delivery
Product information
| Technical data | KL6581 |
|---|---|
| Technology | EnOcean® |
| Number of channels | 1 |
| Supported telegrams | RPS (Repeated Switch Communication), RORG: F6, ORG: 05 1BS (1 Byte Communication), RORG: D5, ORG: 06 4BS (4 Byte Communication), RORG: A5, ORG: 07 |
| Data transfer standard | – |
| Connection | 2 x 2-wires directly at the KL6583 EnOcean® module (connection of max. 8 KL6583) |
| Data transfer rates | 125 kbaud |
| Cable length | max. 500 m |
| Power supply | via the K-bus |
| Connecting cable | up to 500 m |
| Current consumption K-bus | typ. 60 mA |
| Current consumption power contacts | typ. 20 mA + load |
| Configuration | not required |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Special features | up to 8 KL6583 EnOcean® transmitter and receiver modules |
| Weight | approx. 85 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use