ZK4501-0017-xxxx | Motor extension cable 10 mm² with M40 plug, drag-chain suitable (service phase)
ZK4501-0017-xxxx | Motor extension cable 10 mm² with M40 plug, drag-chain suitable (service phase)
Contact assembly
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 95 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 10 mm² + (2 x 1 mm²) + (2 x 1,5 mm²)),
from 25 m motor choke required.
The cable is UL and CSA listed.
suitable for:
- ZK4500-0017-xxxx
- ZK4502-0017-xxxx
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | M40 |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 8-pin |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Installation size | M40 |
| Connector type | socket |
| Contact type | male |
| Number of positions (face) | 8-pin |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Cable by meter |
|---|---|
| Operating voltage | max. 1000 V AC (UL) |
| Cross-section (power) | 10 mm² (approx. AWG8) |
| Cross-section (signal) | 1 mm² (approx. AWG18) |
| Use | drag-chain suitable |
| Material jacket | TPU (thermoplastic polyurethane) |
| Outer cable diameter | 20.3 mm ± 0.4 mm (0.7992" ± 0.0157") |
| Min. bending radius, fixed installation | 4 x outer cable diameter |
| Max. number of cycles | 10 million |
| Jacket color | orange |
| A1 | 100.00 mm |
| A2 | 46.00 mm |
| B1 | 110.00 mm |
| B2 | 45.00 mm |
| Ordering information | Length |
|---|---|
| ZK4501-0017-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2025 - Terms of Use